EcoPoxy FlowCast Clear Casting Resin
EcoPoxy-FlowCast clear casting resin is low viscosity. It is simple to use and creates an excellent casting. It's easy to set and self-level , so it's an ideal option for a variety of uses. It is also able to be moulded into a variety of forms. It takes about an hour to cure completely.
Time to work
EcoPoxy FlowCast clear casting resin is a highly-performance two-component epoxy. It can be used with a variety of woodworking tools , including lathes and table saws. There are numerous uses for this type of resin. It's also eco-friendly and only takes an hour to create.
FlowCast can be dried within 72 hours. It is extremely durable and is resistant to stress cracking. It is suggested that you wear eye protection and a respirator when using the material.
EcoPoxy FlowCast is a two-component epoxy with extremely high-performance, and has a glass-like look and is extremely efficient. It is safe and non-toxic and is eco-friendly. The glass-like clear finish is simple to apply to any material such as metal and wood. It can also be used outdoors. Its unique air release properties as well as its extended gel time makes it suitable for indoor usage.
FlowCast woodworking resin is among the most effective. The epoxy resin is made from two components and is compatible with a variety of substrates. It's also extremely tough and is high in bio-renewable materials.
Too sticky to be touched
EcoPoxy is the most secure epoxy resin. It is produced using bio-based components such as recycled eggshells cashew oil, as well as is totally free of fumes. It's safe to be used near food-related surfaces, and does not have any heavy metals in it. EcoPoxy is a good choice for projects involving wood. Terra Cast resin is another green alternative made of recycled materials.
This resin is ideal to cast. It can be used to encapsulate a variety of substances. It has a low viscosity, which lets it fill in tiny gaps and let out air bubbles. It is able to be mixed with pigments, dyes and then put into molds. A layer could be from 13mm to 38mm thick.
The epoxy is of top-quality and commercial grade. It cures to form a tough, non-yellowing finish that resembles glass. EcoPoxy cures in just a couple of hours and is simple to clean. It can be cleaned with alcohol or Acetone, or make use of a paper towel and warm water.
EcoPoxy FlowCast is a great choice to complete woodworking projects. This resin is ideal for projects that need a strong resin layer as well as a clear finish. To secure the casting resin to its surface, it's suggested to make use of sheathing tape.
It is possible to work with this epoxy resin to mold it in a variety of ways. The resin can be altered in its process of working to produce a cast of high-quality. After a couple of minutes the resin will begin to settle itself. It is possible to remove any sticky residue , and then apply another coat.
Mixing resin with metallic colors can result in excessive heat. Make sure you measure the amount of metallic color you're employing and then add the right amount. The resin also will be more rapid to boil at higher temperatures , so it is essential to work in cool temperatures.
Contact us
FlowCast, the latest EcoPoxy update, boasts pour thicknesses ranging from 1.5 to 2 inches, and operating temperatures of 70 to 80 degrees F (22 to 27 deg Celsius). Clear casting resin is simple to work with and has no VOCs. Since it's low in viscosity, bubbles may be able to rise up and then settle on the surface.
Be sure to read the directions if this is your first time using it. Mixing it incorrectly could cause it to not be able to harden correctly. The hardener and resin must be mixed in a certain quantity. It's not a good option to mix them together or to use an alternative brand.
FlowCast is specifically designed for woodworkers. It is ideal for woodworking projects that need a dense layer of resin. It is possible to tint it to make customized shades. To ensure that epoxy is properly sealed you can make use of sheathing tape.
FlowCast is compatible with a variety of woodworking tools , including lathe, tablesaw belt sander, tablesaw, and lathe. The product can be utilized to complete a myriad of projects. This product is ideal for deep pours due to its environmental-friendly properties.
It is essential to find products that are able to be adjusted to your needs in terms of color separation. The resins with high viscosity are essential. Avoid resins that cause yellowing. Choose brands that self-level and do not have strong smells.
The epoxy resin you purchase should be stored in a cool, dry location that isn't exposed to direct sunlight. It must be kept from freezing and protected from extreme temperatures. Keep your castings clean and sealed until you are prepared to use them. Combine two parts resin and one part hardener together. Mix it for 4 to 5 minutes. Add the pigment to the resin, and then wait another two to three minutes before pouring it into molds.
Complete cure
EcoPoxy's FlowCast clear casting resin has a high-gloss mirror that is UV-resistant. The resin is impervious to air bubbles. The resin cures within 45 minutes. This resin is perfect for a variety of casting and art projects.
The eco-friendly resin is glass-like and has a low viscosity. It is perfect for casting and encapsulation applications. It is also able to pour of up to 38mm.
EcoPoxy Resin is combined with Clear Hardener to produce a long-lasting, high-gloss finish. They are extremely mechanical properties and wetting. They are also able to be laminated. EcoPoxy Resin is a great choice in a variety of ways and is simple to work with. It is suitable to laminate parts and also to emphasize wood grain or graphic.
EcoPoxy FlowCast is a two-component epoxy that has exceptional casting characteristics, is now available. It is easy to work with and is cure transparent. It is compatible with various substrates and is low viscosity. It can be tinted with EcoPoxy Metallic Color Pigments or paint it with a varnish.
Clear casting resin is a great option for pours with a thick consistency. Clear, heat-resistant and transparent It will not alter its shape once it has fully dried. It is simple to use and is used in accordance with weight or volume. If the resin is too thick, it could cause excessive heat, which can cause ugly cracks. Pour the epoxy resin in layers of not more than one eighth inch to prevent the risk of overheating. This lets air escape, which stops the resin from overheating.
The epoxy resin, which is made consisting of one part resin and one part hardener It is a two-component epoxy resin. The two components cure in 45 minutes, leaving an unmistakable, crystal-clear surface that doesn't fade in time. EcoPoxy resin is also suitable to laminate surfaces and it is UV-resistant. It is easy to work with and can be applied to various surfaces, and comes with a an extremely glossy finish. It is also ideal for creating jewelry. It can be used to create pendants and earrings.
Price
EcoPoxy FlowCast clear casting resin cures in just 72 hours and gives a durable and solid finish. It is suitable for a variety of purposes, such as rivers, river tables, and sculptures. It is an environmentally sustainable option because of its low viscosity as well as low exothermic heat accumulation.
EcoPoxy FlowCast epoxy resin is extremely durable and has a low exotherm. It is cured to give a clear, shiny surface. The low viscosity of the resin makes it suitable for molds and casting. It is also able to be used indoors, without causing any smells or fumes.
Address-: 343 Hercules Rd, Emigrant, MT 59027, United States
Phone:- +14062238330
.